Here you can get information about wet multi plate clutch. Multi plate clutch used in different types of vehicles.
Multi-Plate Clutch consists of a number of clutch plates instead of only one clutch plate like in the Single plate clutch. Friction surface also increased because of a number of clutch plates. Because of a number of friction surfaces, The capacity of the clutch to transmit torque is also increased.
Wet clutches, in general, have multiple clutch plates (in cars) and feature a deliver of oil to lubricate and funky the components. This type of clutch is located
in the engine casing. The moist clutches are substantially amplified and consequently can address lots better torque inputs. Wet clutches are normally smaller in size. The noise stage in moist clutches is much less while compares to dry clutches. The presence of oil among plates facilitates in dealing with the noise.
Wear and tear are very lots much less withinside the moist seize. In a moist seize, the lubricating oil continues surfaces smooth and gives smoother performance and longer life. Wet clutches provide a better coefficient of friction, because the floor vicinity will increase because of the presence of multiple plates.
Multi-Plate wet Clutch When the clutch is operated in an oil bath, it is called a wet clutch. In this clutch plate, Thin plates of steel fitted to engine shaft (means drive shaft) and phosphor Bronze plates are fitted to the clutch shaft (means driven shaft). Multi-plate clutch has grooved surfaces for allowing the oil to flow through them. These grooves decrease heat generated when engage and disengage operations.
The plates are alternately fitted to the engine crankshaft and gearbox shaft. They are firmly pressed by strong coil springs and assembled in a drum type casing.
Each of the alternate clutch plate slides on the grooves on the flywheel and the other slides on splines on the pressure plate. Thus, each alternate clutch plate has inner and outer splines.
Multi-Plate Clutches are two types. These clutches are used in automatic transmission.
Multi-Plate wet Clutch When the clutch is operated in an oil bath, it is called a wet clutch. In this clutch plate, Thin plates of steel fitted to engine shaft (means drive shaft) and phosphor Bronze plates are fitted to the clutch shaft (means driven shaft). Multi-plate clutch has grooved surfaces for allowing the oil to flow through them. These grooves decrease heat generated when engage and disengage operations.
Multi-Plate dry Clutch When the clutch is operated dry it is called dry clutch. This clutch has plates with friction material the same as in single plate clutch.
Where Multi-Plate Clutches are used?
The multi-plate clutches are used in racing cars, heavy commercial vehicles, and motorcycles.What are the disadvantages of Multi plate clutch?
Multi-plate clutches are too expensive and heavy.